High current power inductor COILMX MS0530-1R5M designed for distributed power and fpga applications

Product Overview

The MS0530 is a series of low-profile, high-current power inductors designed for various electronic applications. These inductors are suitable for battery-powered devices, DC/DC converters in distributed power systems, and DC/DC converters for field-programmable gate arrays. They offer a compact form factor and high current handling capabilities.

Product Attributes

• Brand: SHENZHEN MOTTOTECHNOLOGY Co.,Ltd
• Website: http://www.coilmx.com
• Email: sales@mottotech.com
• Series Name: MS0530
• Material: Not specified
• Origin: Not specified
• Color: Not specified

Technical Specifications

Outline Dimensions (mm): Not specified in the provided text.

Notes:

• All test data is referenced to 25 ambient.
• Irms: DC current (A) that will cause an approximate T of 40.
• Isat: DC current (A) that will cause L0 to drop approximately 30%.
• Operating temperature range: -55 to +125.
• The part temperature (ambient + temp rise) should not exceed 125 under worst-case operating conditions. Circuit design, component, PWB trace size and thickness, airflow, and other cooling provisions all affect the part temperature. Part temperature should be verified in the end application.
• The rated current as listed is either the saturation current or the heating current depending on which value is lower.
• Storage time: within 6 months. Storage conditions: temperature 5 40C, humidity below 10 75%RH.
• If you require another part number, please contact us.

Applications:

• Low profile, high current power supplies.
• Battery powered devices.
• DC/DC converters in distributed power systems.
• DC/DC converters for field-programmable gate arrays.

Usage Precautions:

• Please be sure to request the procurement specification sheet for further confirmation of detailed characteristics and specifications.
• Content may be subject to change without notice due to product improvements.
• Do not use or store in a corrosive gas environment (salt, acid, alkali, etc.).
• Preheating is required before soldering.
• Temperature difference between preheating temperature, soldering temperature, and chip temperature should be within 150C.
• Soldering correction after installation should be within the conditions specified in the specification sheet.
• Overheating may cause short circuits, performance degradation, or reduced lifespan.
• When assembling the printed circuit board with the chip installed into the device, be careful not to apply residual stress to the chip due to overall deformation of the printed circuit board or local deformation such as at fastening parts.
• Devices generate heat (temperature rise) when energized, so ensure sufficient margin in thermal design.
• For magnetic shielded types, pay attention to coil placement during substrate design.
• Electromagnetic interference may cause malfunction.
• Use an anti-static wrist strap as static electricity from the human body can be conducted to the ground line.
• Do not place this product near magnets or magnetic objects.
• Use within the range specified in the procurement specification sheet.
• This product catalog describes products for general electronic equipment (AV equipment, communication equipment, home appliances, entertainment equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) used in general standard applications under normal operation and usage methods.
• The company does not guarantee applicability, performance, quality, etc., for the following uses (hereinafter referred to as 'Specific Uses') where high safety and reliability are required, or where device failure, malfunction, or poor operation may cause damage to life, body, or property, or may have significant social impact: (1) Aviation, aerospace equipment (2) Transportation equipment (automobiles, trains, ships, etc.) (3) Medical equipment (4) Power generation control equipment (5) Nuclear power related equipment (6) Submarine equipment (7) Vehicle control equipment (8) Public-oriented high-information processing equipment (9) Military equipment (10) Electric heating appliances, combustion equipment (11) Disaster prevention, anti-theft equipment (12) Various safety devices (13) Other uses identified as Specific Uses.
• When designing equipment using products described in this product catalog, ensure protective circuits and devices are in place that comply with the intended use and condition of the equipment, and install backup circuits, etc.

High current power inductor COILMX MS0530-1R5M designed for distributed power and fpga applications Images