Home > Oscillators >

Oscillator Surface Mount Epoxy Molding Package Nominal Frequency 48 MHz HF Compliant SJK 7NM48000C33YC

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Oscillator Surface Mount Epoxy Molding Package Nominal Frequency 48 MHz HF Compliant SJK 7NM48000C33YC

Operating Temperature : -40℃~+85℃

Output Type : LVCMOS

Frequency Stability : ±25ppm

Frequency : 48MHz

Description : LVCMOS Programmable Oscillator 48MHz SMD5032-4P

Mfr. Part # : 7NM48000C33YC

Model Number : 7NM48000C33YC

Package : SMD5032-4P

Contact Now

Product Overview

The Si MEMS Oscillator Series 7NM is a surface mountable oscillator designed for various electronic applications. It features epoxy molding and a compact 5.0x3.2mm package. This series offers a nominal frequency of 48.000000 MHz with a supply voltage range of 1.8V to 3.3V. It is built to withstand a wide operating temperature range of -40 to 85 and is compliant with RoHS, REACH, and HF environmental standards.

Product Attributes

Brand: SJK
Series: 7NM
Packaging: Epoxy Molding
Mounting Type: Surface Mount
Environmental Compliance: RoHS, REACH, HF
Moisture Sensitivity Level: Level 1
Minimum Packaging: 1000pcs/real

Technical Specifications

Symbol	Parameter	Min	Type	Max	Units	Notes
	Nominal Frequency		48.000000		MHZ
	Frequency Stability AT 25		10		PPM
	Frequency Stability Over Operating Temperature range		15		PPM
Topr	Operating Temperature	-40	25	85
Tstg	Storage Temperature	-55		125
VDD	Supply Voltage	1.62	3.3	3.63	V	10%
Icc	Input Current			10	mA
	Enable Control		Yes			Pad1
CL	Output Load : CMOS			15	pF
VoH	Output Voltage High		90%		Vdd	V
VoL	Output Voltage Low		10%		Vdd	V
Tr	Rise Time			5	ns	10%90%VDD Level
Tf	Fall Time			5	ns	90%10%VDD Level
	Symmetry (Duty ratio)	45		55	%	TH/T
Tosc	Start-up Time			10	ms
Vhi	Enable Voltage High		70%		Vdd	V
Vlo	Disable Voltage Low		30%		Vdd	V
	Aging		3		ppm/yr.	1st. Year at 25
T off	Output Disable Delay Time			150	us
T on	Output Enable Delay Time			150	us
	Phase Jitter 12KHZ~20MHZ	0.5		1.0	ps
	Dimensions		5.0x3.2		mm

Dimensions

5.0x3.2mm

Marking

Information not available in provided text.

Test Circuit

Control input (output enable/disable): Logic 1 or open on pad 1. Oscillator output: Logic 0 on pad 1: Disable output to high impedance.

Waveform Conditions

Waveform measurement system should have a minimum bandwidth of 5 times the frequency being tested.

Output Enable / Disable Delay

The oscillator timing during normal operation is shown in the figure. When the device is in standby, the oscillator stops. When standby is released, the oscillator starts and stable oscillator output occurs after a short delay.

Suggested Reflow Profile

Total time: 200 sec. Max / Solder melting point: 220

Reliability Test Specifications

Mechanical Endurance

No.	Test Item	Test Methods	REF. DOC
1	Drop Test	75 cm height, 3 times on concrete floor.	JIS C6701
2	Mechanical Shock	Device are shocked to half sine wave (1000 G) three mutually perpendicular axes each 3 times. 0.5m sec. duration time.	MIL-STD-202F
3	Vibration	Frequency range 10 ~ 2000 Hz, Amplitude 1.52 mm/20G, Sweep time 20 minutes. Perpendicular axes each test time 4 Hrs (Total test time 12 Hrs).	MIL-STD-883E
4	Gross Leak	Standard Sample For Automatic Gross Leak Detector, Test Pressure: 2kg / cm2.	MIL-STD-883E
5	Fine Leak	Helium Bomging 4.5 kgf / cm 2 for 2 Hrs.
6	Solderability	Temperature 245 5, Immersing depth 0.5 mm minimum, Immersion time 5 1 seconds. Flux Rosin resin methyl alcohol solvent (1 : 4).	MIL-STD-883E

Environmental Endurance

No.	Test Item	Test Methods	REF. DOC
1	Resistance To Soldering Heat	Pre-heat temperature 125 , Pre-heat time 60 ~ 120 sec. Test temperature 260 5 , Test time 10 1 sec.	MIL-STD-202F
2	High Temp. Storage	+ 125 3 for 1000 12 Hrs.	MIL-STD-883E
3	Low Temp. Storage	- 40 3 for 1000 12Hrs.	MIL-STD-883E
4	Thermal Shock	Total 100 cycles of the following temperature cycle.	MIL-STD-883E
5	Pressure Cooker Storage	121 3 , RH100% , 2 bar , 240Hrs.	JIS C6701
6	High TempHumidity	85 3, RH 85% , 1000 Hrs.	JIS C5023

2304131800_SJK-7NM48000C33YC_C668821.pdf

Wholesale Oscillator Surface Mount Epoxy Molding Package Nominal Frequency 48 MHz HF Compliant SJK 7NM48000C33YC from china suppliers

Oscillator Surface Mount Epoxy Molding Package Nominal Frequency 48 MHz HF Compliant SJK 7NM48000C33YC Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!