Home > Oscillators >

Programmable Crystal Oscillator EPSON SG-8002CE 16.000000MHz PHM CMOS Technology and Control Functions

Product Categories

Fixed Inductors [2693]
RF Filters [248]
Oscillators [540]
Crystals [2945]
Rotary Potentiometers, Rheostats [234]
Programmable Oscillators [242]
Ceramic Filters [216]
Delay Lines [5]
Aluminum Electrolytic Capacitors [2799]
Trimmer Potentiometers [1587]
Aluminum - Polymer Capacitors [1039]
Thumbwheel Potentiometers [25]
Common Mode Chokes [1562]
Chassis Mount Resistors [135]
Chip Resistor - Surface Mount [1995]
Capacitor Kits [6]
Resistor Kits [17]
Cable Ferrites [83]
EMI/RFI Filters (LC, RC Networks) [152]
Ferrite Beads and Chips [1587]
Arrays, Signal Transformers [34]
Value Display Potentiometers [4]
Resistor Networks, Arrays [593]
Through Hole Resistors [711]
Wireless Charging Coils [34]
Film Capacitors [835]
Thin Film Capacitors [914]
Ceramic Capacitors [2764]
Tantalum Capacitors [134]
Current Sense Resistors [124]
Power Line Filter Modules [49]
Resonators [79]
Capacitor Networks, Arrays [24]
Electric Double Layer Capacitors (EDLC), Supercapacitors [3]
Pin Configurable/Selectable Oscillators [13]
Silicon Capacitors [2]
Adjustable Power Resistor [64]
Specialized Resistors [144]
VCOs (Voltage Controlled Oscillators) [81]
Trimmers, Variable Capacitors [9]
Ferrite Cores [96]
Feed Through Capacitors [134]
Slide Potentiometers [123]
Motor Start, Motor Run Capacitors (AC) [29]
SAW Filters [201]

Beijing Silk Road Enterprise Management Services Co., Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Programmable Crystal Oscillator EPSON SG-8002CE 16.000000MHz PHM CMOS Technology and Control Functions

Operating Temperature : -40℃~+85℃

Voltage - Supply : 4.5V~5.5V

Frequency Stability : ±100ppm

Frequency : 16MHz

Description : Programmable Oscillator 16MHz 4.5V~5.5V SMD3225-4P

Mfr. Part # : SG-8002CE 16.000000MHz PHM

Model Number : SG-8002CE 16.000000MHz PHM

Package : SMD3225-4P

Contact Now

Crystal Oscillator SG-8002 Series

Product Overview

The SG-8002 series crystal oscillators from Seiko Epson offer programmable output with CMOS technology, designed for a wide output frequency range from 1 MHz to 125 MHz. These oscillators support various supply voltages including 3.0V, 3.3V, and 5.0V, and feature Output Enable (OE) or Standby (ST) functions for flexible control. They are manufactured using PLL technology for short mass production lead times. The series is suitable for general use in electronic equipment and is designed with environmental and quality management systems in mind, adhering to ISO 14001 and ISO 9001 standards. Some models are designed for automotive applications.

Product Attributes

Brand: SEIKO EPSON
Technology: PLL
Certifications: ISO 14001, ISO 9001, ISO/TS 16949 (for automotive)
Environmental Compliance: Pb-free, EU RoHS directive compliant (with exceptions for specific components)

Technical Specifications

Item	Symbol	Specifications	Conditions / Remarks
Output frequency range	f0	1 MHz to 125 MHz	VCC = 4.5 V to 5.5 V VCC = 3.0 V to 3.6 V VCC = 2.7 V to 3.6 V
Supply voltage	VCC	4.5 V to 5.5 V 2.7 V to 3.6 V	-
Storage temperature	T_stg	-55 C to +125 C (SG-8002CA / JA / DC) -55 C to +100 C (SG-8002JC) -40 C to +125 C (SG-8002CE)	Storage as single product.
Operating temperature	T_use	-20 C to +70 C / -40 C to +85 C	*1
Frequency tolerance	f_tol	B: 50 10^-6 C: 100 10^-6 M: 100 10^-6	-20 C to +70 C -40 C to +85 C (except SG-8002JC) *3
Current consumption	ICC	40 mA Max. (SG-8002CE) 28 mA Max. 45 mA Max. (SG-8002CA / JC / JA / DC)	No load condition, Max. frequency
Output disable current	I_dis	30 mA Max. 16 mA Max.	OE=GND (PT.PH,PC)
Stand-by current	I_std	50 A Max.	ST =GND (ST,SH,SC)
Symmetry	SYM	40 % to 60 % 45 % to 55 %	TTL load: 1.4 V, Max. load condition CMOS load:50 % VCC level, Max. load condition *1
Output voltage (High)	VOH	VCC -0.4 V Min.	IOH=-16 mA (PT,ST,PH,SH) , -8 mA (PC,SC)
Output voltage (Low)	VOL	0.4 V Max.	IOL=16 mA (PT,ST,PH,SH) , 8 mA (PC,SC)
Output load condition (TTL)	L_TTL	5 TTL Max.	Max. frequency and Max. Supply voltage (SG-8002CE / CA / JA / DC ) f0 90 MHz and Max. Supply voltage (SG-8002JC ) *1
Output load condition (CMOS)	L_CMOS	15 pF Max. 25 pF Max.	Max. frequency and Max. Supply voltage (SG-8002CE / JC) Max. frequency and Max. Supply voltage (SG-8002CA / JA / DC ) *1
Input voltage (High)	VIH	2.0 V Min. 70 % VCC Min.	OE terminal or ST terminal
Input voltage (Low)	VIL	0.8 V Max. 20 % VCC Max.	OE terminal or ST terminal
Rise / Fall time	tr/ tf	4 ns Max. 3 ns Max.	TTL load: 0.4 V to 2.4 V level CMOS load: 20 % VCC to 80 % VCC level *1
Start-up time	t_str	10 ms Max.	Time at minimum supply voltage to be 0 s
Frequency aging	f_aging	5 10^-6 / year Max.	+25 C, VCC=5.0 V/ 3.3 V (PC,SC) First year *1
Jitter (Cycle to cycle)	-	150 ps Max. 200 ps Max.	5.0 V, 33 MHz f0 125 MHz, L_CMOS=15 pF 5.0 V, 1.0 MHz f0 < 33 MHz, L_CMOS=15 pF
Jitter (Peak to peak)	-	200 ps Max. 250 ps Max.	5.0 V, 33 MHz f0 125 MHz, L_CMOS=15 pF 5.0 V, 1.0 MHz f0 < 33 MHz, L_CMOS=15 pF
Jitter (Cycle to cycle)	-	200 ps Max.	3.3 V, 1.0 MHz f0 125 MHz, L_CMOS=15 pF
Jitter (Peak to peak)	-	250 ps Max.	3.3 V, 1.0 MHz f0 125 MHz, L_CMOS=15 pF
Model	-	Supply Voltage	Frequency Range
SG-8002CE	PT/ST	4.5 V to 5.5 V	1.0 MHz to 125 MHz
SG-8002CE	PC/SC	3.0 V to 3.6 V	1.0 MHz to 125 MHz
SG-8002CE	PC/SC	2.7 V to 3.6 V	1.0 MHz to 66.7 MHz
SG-8002CA / JA / DC	PT/ST	4.5 V to 5.5 V	1.0 MHz to 125 MHz
SG-8002CA / JA / DC	PC/SC	3.0 V to 3.6 V	1.0 MHz to 125 MHz
SG-8002CA / JA / DC	PC/SC	2.7 V to 3.6 V	1.0 MHz to 66.7 MHz
SG-8002JC	PT/ST	4.5 V to 5.5 V	1.0 MHz to 125 MHz
SG-8002JC	PC/SC	3.0 V to 3.6 V	1.0 MHz to 125 MHz
SG-8002JC	PC/SC	2.7 V to 3.6 V	1.0 MHz to 66.7 MHz
Package Type	-	Dimensions (mm)	-
SON 4pin	SG-8002CE	3.2 x 2.5 x 1.05	-
SON 4pin	SG-8002CA	7.0 x 5.0 x 1.4	-
SOJ 4pin	SG-8002JC	10.5 x 5.8 x 2.7	Package and pin compatible with SG-636.
SOJ 4pin	SG-8002JA	14.0 x 9.8 x 4.7	Package and pin compatible with SG-615.
DIP half size	SG-8002DC	13.7 x 6.6 x 5.3	-

*1 Please refer to Outline specifications page for information regarding; operating temperature, available frequencies, symmetry, output load conditions and rise/fall time.

*2 Please refer to Jitter specifications and characteristics chart page for PLL-PLL connection & Jitter specification.

*3 Please refer to Outline specifications for availability of tolerance M. A Frequency checking program on the Seiko Epson website is also available.

2411041629_EPSON-SG-8002CE-16-000000MHz-PHM_C390318.pdf

Wholesale Programmable Crystal Oscillator EPSON SG-8002CE 16.000000MHz PHM CMOS Technology and Control Functions from china suppliers

Programmable Crystal Oscillator EPSON SG-8002CE 16.000000MHz PHM CMOS Technology and Control Functions Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Beijing Silk Road Enterprise Management Services Co., Ltd.
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!